-40%
MT5 to 5C Lathe Spindle Collet Sleeve
MT5 to 5C Lathe Spindle Collet Sleeve

MT5 to 5C Lathe Spindle Collet Sleeve

$ 52.8

Availability: 100 in stock
  • MPN: Does Not Apply
  • Collet Chuck Type: 5C Collet Chuck
  • All returns accepted: ReturnsNotAccepted
  • Condition: Used
  • Brand: Unbranded/Generic
  • Shank Type: Morse #5 Taper

    Description

    MT5 to 5C Collet Sleeve will fit lathe spindles that accept the Morse #5 taper. In good condition.
    Please measure your spindle before bidding. A Morse #5 taper has a gage line of 1.748", that is the size that your spindle needs to be for this Collet Sleeve to work. Below I have listed the various Morse Tapers and their maximum diameter, if the opening to your spindle is not within a few thousands of 1.748" then do not bid on this sleeve because it will not fit and function correctly.
    You should also check your spindle's bore diameter. The through bore on your spindle should be around 1.5" for the sleeve to seat.
    Taper   Large End
    #0
    0.3561"
    #1
    0.4750"
    #2
    0.7000"
    #3
    0.9380"
    #4
    1.2310"
    #4-1/2  1.5000"
    #5
    1.7480"
    #6
    2.4940"
    #7
    3.270"